Item # 18841• 1-1/4" O.D. aluminum washers work with most body bolts to increase the surface area preventing pull through while providing a smooth finished look
• Washers are 1/8" thick
• Have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4" in diameter
• Color: Black
• Package of 10
Item # 19402• For use with quick turn fasteners
• Place transfer punch in a weld plate or body panel
• Position panel over top of punch and lightly tap with a hammer leaving a mark on the panel where hole is to be drilled
• Punch Size: 5/16"
Item # 19403• For use with quick turn fasteners
• Place transfer punch in a weld plate or body panel
• Position panel over top of punch and lightly tap with a hammer leaving a mark on the panel where hole is to be drilled
• Punch Size: 7/16"
Item # 19405• This tool is a must when adjusting tension of quick turn springs
• Simply turn knob on adjuster
• Evenly pulls or pushes spring without kinking or breaking spring
• Accurately drill panels when installing quick turn fastener springs
• Start with a 1/4" center hole and use the fixture to locate and drill 1/8" holes for mounting the springs
• Size listed is spring center to center distance
• Quick turn fixtures are available for 3/4", 1" or 1-3/8" springs
Starting at$23.99
Details
Item # A6500W• 3/16" back-up washers for rivets
• Use to add strength to rivets
• Aluminum construction
• Box of 500
Item # 34262• 7-1/2" long stainless steel cable ties
• An excellent choice when securing header wrap to exhaust tubes
• Work great when nylon wraps won't stand up to the heat
• Rust and corrosion resistant cable ties are T-304 stainless
• Sold as 8/Pack
Item # 34264• 14-1/2" long stainless steel cable ties
• An excellent choice when securing header wrap to exhaust tubes
• Work great when nylon wraps won't stand up to the heat
• Rust and corrosion resistant cable ties are T-304 stainless
• Sold as 4/Pack
Item # 14116• Allstar Wire Tie Mounting Bases, 3/4".
• Self-adhesive mounting bases provide a location for attaching standard wire ties to secure wiring, cables and hoses.
• Bases mount to clean flat surfaces and accept 75# and smaller wire ties.
• Package of 10.
Item # 14117• Wire Tie Mounting Bases, 1-1/8".
• Self-adhesive mounting bases provide a location for attaching standard wire ties to secure wiring, cables and hoses.
• Bases mount to clean flat surfaces and accept 75# and smaller wire ties.
• Package of 10.