Testers

• Improves front-end chassis setup
• Reads camber from +6° to -6°, accurate to 1/4°
• Caster readout from +12º to -4º in 1/2º increments
• Vials checked for accuracy
• Critical surfaces are CNC machined for accuracy
• Strong, accurate magnetic adapter, won't chip or flake
• Comes with silver carrying case

• CNC-machined, billet, aluminum housing
• Easy-to-read bubble display
• Measures -6 to +6 degrees of camber & -8 to +8 degrees of caster
• High 0.25 degree accuracy
• Includes magnetic adapter & case

• Easy-to-use tester checks ring seals, valves, even head gaskets
• Don't wait too long to rebuild that expensive motor, but don't do it too soon either!
• Achieve consistent power
• Rugged design features rubber bumpers to protect the gauges
• Exclusive Longacre gauge manifold meters airflow for precise readings

• Cut oil filter open to see problems before they cost you an engine
• Rigid easy-to-use one piece design
• Billet anodized aluminum
• Filter cutting range 2-3/8" - 5"

• Up to 10 times greater accuracy than traditional bubble gauges
• Uses standard 9-volt battery
• Indicates to 1/10 degree & has a +/- 20° caster/camber reading
• Auto shutoff & inclinometer mode for pinion & strut angles
• Lightweight, aluminum compact design holds to hub better
• Push button on/off
• Caster/camber select with built-in diagnostic mode for resetting camberzero
• Backlit for night use
• Includes magnetic adapter & case

• Toe plates, set of 2
• High strength, lightweight aluminum
• Quick & accurate toe measurements
• Measures toe in, toe out
• Includes 2 tapes

• Locate Angles Digitally
• Large LCD Display
• Magnetic Base & Sides
• Reads from 0°- 90° in 0.05° Increments
• Display Rotates 180°
• Backlit for Night Use
• Standard 9-Volt Battery Operation

• Repeatable Accuracy for Engine Cylinder & Fuel Injector/Barrel Valve Leak Percentages
• Reads to 400 PSI
• Locking Regulator Allows Incoming Air Pressure Adjustment
• Intake Air Pressure & Hose Length will Not Affect Readings (Must have 90 PSI Input Pressure)
• Meets FAA Standards for Leak Down Testing Engines up to 5.00-Inch Bore
• Optional Hoses Available
• System Includes Case, 14mm Leak Down Hose & 14mm Compression Hose

• Same Construction as Intercomp’s Premier Digital Turn Plate, but Utilizes Precise CNC Machined Numbers
• Range from ±35° (70° Total)
• Can be Zeroed with Car in Place
• Dimensions: 13" x 15" x 1.625" (330 x 380 x 41mm)
• Set of Two