Ignition Coils

• Improved output coil for electronic ignitions, Blaster Ignition or MSD 5, 6, & 7 Series (ballast resistor required for points)
• Alkyd tower with high dielectric properties is less prone to carbon tracking
• 100:1 turns ratio & lower primary resistance produce high voltage output
• Metal canister filled with premium grade oil for cooling
• CARB E.O. Approved

• Metal canister with epoxy to protect windings from high vibration applications
• Improved output coil for electronic ignitions & MSD Ignitions (ballast resistor required for points)
• 100:1 turns ratio & lower primary resistance produce high voltage output
• CARB E.O. Approved

• Perfect for cannister type coils
• Easy, univer­sal mounting for standard size ignition coils up to 2.25” in diameter
• Uses a bolt & nut combination instead of the easily stripped self-tapping screw common on other brand brackets

• Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, & 7 Series
• Supplied with 2o spark plug wire boots, terminals & a ballast resistor (required if used with stock points ignition)
• 100:1 turns ratio & lower primary resistance produce high voltage output
• MSD Red metal canister is filled with a premium grade oil for cooling
• CARB E.O. Approved

• Rebuild your GM HEI with MSD performance.
• Exceptional high speed coil saturation for full power high rpm operation.
• Matched Coil and Module produce the highest voltage and energy.
• Complete kit with a brass terminal Cap, Rotor, Module, Coil and dust cover.

• Extra tall secondary tower for secure coil wire connection
• Improved output coil for electronic ignitions, and MSD Ignitions (ballast resistor required for points)
• 100:1 turns ratio & lower primary resistance produce high voltage output
• MSD red metal canister filled with premium grade oil for cooling
• Supplied with a 90° spark plug style terminal & boot
• CARB E.O. Approved

• Designed for racing applications with MSD 7 Series Ignition Control
• U-core winding design produces more voltage & current
• 70:1 turns ratio & lower primary resistance produce high voltage output
• Windings encased in fracture resistant compound for vibration resistance
• Dupont Rynite housing with isolated tower & brass primary terminals
• Supplied with rubber shock mounts
• No CARB Exemption Order Number

• High voltage coil designed for short duration applications only
• Primary & secondary windings encased in Ciba polyurethane for vibration protection
• Extremely low primary resistance
• Housing is molded from a durable & high dielectric polyester
• Supplied with rubber shock mounts
• For MSD 7ALs, 8 & 10 Ignitions only, not for use on street vehicles
• No CARB Exemption Order Number

• Direct performance replacement for GM HEI coil-in-cap distributors
• 70:1 turns ratio & lower primary resistance produce high voltage output
• Full power sparks to 9,000 RPM when used with 8364 MSD HEI Module
• Recommended for use with MSD HEI Module PN 8364
• CARB E.O. Approved