Engine Accessories

Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

• Pliable for tight bends
• Capable of withstanding 500°F direct / 2000°F radiant heat
• Five popular diameters to choose from
• Trim to desired length

Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

• Versatility of fitting diameters 1/2" to 1-1/4"
• Convenient hook & loop designed edges
• Withstands 500°F direct continuous/2000°F radiant heat
• No need to remove wires and hoses
• Easily trimmed to length
• Fireproof
• 1/2” to 1-1/4” diameters x 3 foot length

Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. It can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, fiberglass and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.

• Excellent heat & sound barrier
• Wind and water will not affect adhesive
• Minimum clearance required, only 3/16” thick
• Easily shape, trim, peel & stick
• Aggressive self-adhesive backing holds past 450°F
• Withstands 1750°F direct continuous heat
• Use to shield & reflect unwanted heat

• Remote Oil Filter Mount
• Accepts Chevy V8 type spin-on oil filters
• Flow direction: inlet right side, outlet left side
• Great for dry sump oiling systems or when installation limitations require remote mounted filter
• Cast aluminum design tapped for 1/2" NPT inlet & outlet pipe adapters
• Center port available for pressure or temperature gauge plumbing

• Remote Oil Filter Mount
• Accepts Chevy V8 type spin-on oil filters
• Flow direction: inlet left side, outlet right side
• Great for dry sump oiling systems or when installation limitations require remote mounted filter
• Cast aluminum design tapped for 1/2" NPT inlet & outlet pipe adapters
• Center port available for pressure or temperature gauge plumbing

Constructed from the same material as Fire Sleeve but with the convenience of a hook & loop edge closure design. Simply wrap Fire Wrap 3000 around wires, cables or hoses without the need of disconnecting.

• Withstands direct heat up to 500°F
• Protects against oil, dirt, road grime & other contaminates
• Pliable enough to shape & fit tightest bends
• Length: 2 Ft
• Inner Diameters: 5/8", 1" or 1-1/2"

• Complete kit includes sender, light, wire, terminals
• Sender Style: Oil Temperature, 270ºF 1/2" NPT Fitting
• Blue Warning Light - 12 Volts 3/4" Diameter
• Bulb: #194
• 16-Gauge Black Wire - 60" Length
• Style: (3) Insulated Blade Terminals
• (1) Oil Temperature Decal

This instant timing knob is truly revolutionary! The knob allows you to change your timing without having to loosen and retighten the distributor hold-down clamp. It is great for quick pit stop tuning. Plus, your crew chief will be able to avoid those nasty hand burns that happen while rotating a distributor on a hot racing engine.

• Instant timing knob protrudes from the side of the distributor
• To advance or retard the timing, simply turn the knob
• 1/2 revolution equals 1 degree of timing; a full revolution equals 2 degrees of timing
• So accurate that no timning light is needed to verify it

• Premium quality ARP stainless steel
• Fasteners install most anything on a car, boat or trailer
• Specially alloyed polished stainless steel resists rust
• Nominally rated 180,000 psi tensile strength provides substantial margin of safety over Grade 8 hardware
• 5-pack, Washers included
• Standard thread
• Under Header Length: 1.250"
• Wrenching: 3/8"
• Diameter-Pitch: 5/16"-18
• 12-Point head