Braces and Tools

• Flexible brace is adjustable
• Can be used to support lower quarter panel or nose sides
• Constructed of Plastic

• Body radius tool
• Solid oak tool can be used to flare edges of wheel openings when fabricating fenders and quarter panels out of aluminum
• Tool has two different radiuses to create the correct flare for your needs

• Aluminum constructed Late Model body brace kit
• Slotted aluminum kit simplifies installation of body panels
• Three door braces, two lower quarter, two upper quarter, and two front fender pieces are included
• Use flat stock, spring steel, or slotted strapping to complete assembly (sold separately)

• Aluminum constructed Modified body brace kit
• Slotted aluminum kit simplifies installation of body panels
• Two door braces, two lower quarter braces and two upper quarter braces are included
• Use flat stock, spring steel, or slotted strapping to complete installation (sold separately)

• For use with quick turn fasteners
• Place transfer punch in a weld plate or body panel
• Position panel over top of punch and lightly tap with a hammer leaving a mark on the panel where hole is to be drilled
• Punch Size: 5/16"

• For use with quick turn fasteners
• Place transfer punch in a weld plate or body panel
• Position panel over top of punch and lightly tap with a hammer leaving a mark on the panel where hole is to be drilled
• Punch Size: 7/16"

• 40 foot roll of spring steel
• Use to make braces when hanging body and fender pieces
• Hardened and tempered coil is 40' long x 1" wide x .062" thick

• Specially hardened drill bit is required for drilling spring steel
• 17/64" size simplifies installation of 1/4" hardware
• Sold each

• Hammer type spring steel punch
• Spring steel punch places a 1/4" diameter hole 1/2" from the end of Allstar's 1" x .062" thick spring steel material
• Built-in stop positions material for accurate hole placement
• Place on a hard surface and strike with a 3 to 4lb hammer