Brake Accessories

• Steel frame tab
• 90 degree weld-on
• Use to mount brake fittings
• Sold in 10-Pack

• Contain the mess of bleeding brakes by capturing fluid in this 16oz. bottle
• 12" long hose which attaches to most bleeder screws
• Removable cap has a built-in fitting to secure the hose during storage to help prevent spills
• Magnet retainer secures the bottle to a steel object such as a brake drum or rotor during bleeding
• Has a one way check valve built-in for one person brake bleeding

• 2 Lb Residual Valve eliminates excess pedal travel
• All billet design keeps your brake pads close to your rotors so driver does not have to pump the pedal
• -03 AN Male end will thread right into master cylinder
• 1/8" NPT Female end allows you to easily plumb the brake system
• Black anodized finish
• Comes with a brass crush washer

• Brass brake shutoff valve
• Valve has 1/8" NPT inlet and outlet and is rated at 2,000 psi
• Use Allstar ALL50120 fitting for 3/16" inverted flare brake line
• Dimensions: 1/2" W x 1-3/4" L x 1-9/16" H

• Residual check valves hold a small amount of pressure in the brake system to keep the brake system functioning properly while helping to maintain a firm pedal.
• Maintaining system pressure prevents fluid from returning to the master cylinder when the master cylinder is positioned lower than or close to the same height as the calipers or wheel cylinders.
• Proper system pressure also keeps piston and wheel cylinder seals expanded creating a positive seal and brake pads seated against the rotor.
• Valves include two 3/16" inverted flare fittings.

• Residual check valves hold a small amount of pressure in the brake system to keep the brake system functioning properly while helping to maintain a firm pedal.
• Maintaining system pressure prevents fluid from returning to the master cylinder when the master cylinder is positioned lower than or close to the same height as the calipers or wheel cylinders.
• Proper system pressure also keeps piston and wheel cylinder seals expanded creating a positive seal and brake pads seated against the rotor.
• Valves include two 3/16" inverted flare fittings.

• Contain the mess of bleeding brakes.
• Capture fluid in this 16 oz. bottle with a 12" long hose which attaches to most bleeder screws.
• Removable cap has a built-in fitting to secure the hose during storage to help prevent spills.
• Choose from a steel lanyard retainer that suspends the bottle from a chassis or suspension component or a magnet retainer to secure the bottle to a steel object such as a brake drum or rotor during bleeding.

• Five piece, aluminum wrench set for use with aluminum AN-style, braided hose fittings.
• AN Sizes included are -6, -8, -10, -12, and -16.
• Each wrench is finished in different color anodizing for easy identification.

Wilwood’s Dynamic Mount Rotor Bolt kits contain bolts and hardware for dynamic mounting for following specific rotor plate combinations. Rotor 160-10717, Plates 300-10743 and 300-10720.

• Wilwood Rotor Bolt Kit, Dynamic Sprint 9-Bolt with T-Nut
• Grade 8 Alloy Steel
• Weight: 0.350 oz
• Bolt Qty: 9
• Head/Drive Type: Hex
• Length: 0.625
• Thread: 1/4-28
• Washer: Flat