Fuel Fittings & Accessories

• Fuel Pressure Take Off Fitting
• Male AN to same size Female AN ends
• 1/8" NPT inlet port
• Aluminum material
• Blue anodized finish - looks great & protects from corrosion
• Allows pressure to bleed off so you can check your fuel pressure using the 1/8" gauge port

• Fuel Pressure Adapter Fitting
• Male AN to Male Pipe ends
• 1/8" NPT inlet port
• Aluminum material
• Blue anodized finish - looks great & protects from corrosion
• Can use with fuel log, pump or regulator & use a gauge in the inlet port to monitor pressure

Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000°F.

• Withstands 500°F of direct heat/2000° radiant
• Edges attach to itself with hook & loop closure design
• Universal-trim length to size
• Can easily be removed for shows
• No need to remove starter for installation in most cases
• Multiple uses to protect master cylinders, cool cans, distributors, fuel pumps & more
• 7” wide x 24” long

Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

• Pliable for tight bends
• Capable of withstanding 500°F direct / 2000°F radiant heat
• Five popular diameters to choose from
• Trim to desired length

Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

• Versatility of fitting diameters 1/2" to 1-1/4"
• Convenient hook & loop designed edges
• Withstands 500°F direct continuous/2000°F radiant heat
• No need to remove wires and hoses
• Easily trimmed to length
• Fireproof
• 1/2” to 1-1/4” diameters x 3 foot length

Constructed from the same material as Fire Sleeve but with the convenience of a hook & loop edge closure design. Simply wrap Fire Wrap 3000 around wires, cables or hoses without the need of disconnecting.

• Withstands direct heat up to 500°F
• Protects against oil, dirt, road grime & other contaminates
• Pliable enough to shape & fit tightest bends
• Length: 2 Ft
• Inner Diameters: 5/8", 1" or 1-1/2"

Aeromotive’s Billet Fuel Sample Valve is designed to simplify installation and make fuel checks a snap! Packed with common sense features, it’s simply the best sample valve on the market.

• Installs into any 1/8” NPT gauge port.
• Provides a duplicate 1/8” NPT port on the valve for installation of fuel pressure gauge or pressure sensor transducer.
• Sample port is equipped with stainless steel barb fitting for extension hose and rotates 360° for ease of installation and sampling.
• The “dual action”, spring loaded safety valve keeps the valve sealed when
unlocked and rotates into a locked position for racing.
• When a fuel sample is required, rotate to the unlocked position, press for fuel sample and release, re-lock the valve and go race.

Available as a 3/8" Quick Connect Sample Valve Kit, P/N 17119
Fits most Ford Modular and GM LS Series Engines

• “Dry” Fuel Pressure Gauge
• 1.5” Diameter
• 0-100 PSI

• Aluminum fuel filter mounting bracket
• For 1-1/2" diameter tubing
• 2" inner diameter hole