Radius Rods, Tie Rods, Panhard Bars

• Repair or enlarge tapered holes to accept tie rod ends or ball joints
• Reamers may be used in a drill with a 1/2" chuck by removing the T-handle
• Large Diameter is 1-1/8" and Small Diameter is 3/8"
• 9.56 Degree
• 2" taper per foot

• These swedged 6061 aluminum radius rods are strong and lightweight
• 5/8" -18 internal threads
• Rods have a 1-1/8" Outer Diameter
• Black powdercoat finish
• Available in 18" to 24-1/2" lengths in 1/2" increments
• Sold each

• These swedged 6061 aluminum radius rods are strong and lightweight
• 3/8" -24 internal threads
• Rods have a 3/4" Outer Diameter
• Black powdercoat finish
• Available in 4" to 24-1/2" lengths in 1/2" increments
• Sold each

• Dropped Steel tie rod tubes are popular on modifieds and street stocks providing additional clearance on the right front tie rod assembly
• 15" overall tube length
• Tube is .156" wall and 7/8" outer diameter
• 5/8"-18 RH threads located on the inside/center link end
• 5/8"-18 LH threads on the outer/spindle end

• Replacement tube ONLY for RF tie rod with a LH stock inner
• Tube is made like our 5/8" suspension tubes with 13/16" hex on each end
• Approximately 15" long and is lasered with thread direction (15" tube only)

• Complete right front tubular tie rod with a short lefthand stock inner
• Tube has a 13/16" hex on each end like our 5/8" suspension tubes
• Tie rod assembly comes with greasable heim withdust cap on spindle side and short LH stock inner (18-1/4" - 20") for center link

• Left Front tie rod with a short LH stock inner (18-1/2" - 19-3/4")
• This assembly uses our thick wall DOM machined suspension tube with a 13/16" hex on each end
• The heim has a zerk for easy lubrication and comes with a dust cap

• Complete RF tubular tie rod with LH rod end inner (18-3/4" - 20")
• Tube has a 13/16" hex on each end like our 5/8" suspension tubes
• Tie rod assembly comes with greasable heims with dust caps