Shopping

Heat Screen is constructed of a high temperature resistant fiberglass material, and with a thickness of only .060”. Heat Screen features a thermal barrier on one side made of a superior reflective aluminized mylar surface capable of withstanding direct heat up to 1200°F.

Heat Screen can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels and under carpeting.

• Aluminized surface reflects up to 2000°F radiant /1200°F direct /continuous heat
• Multitude of uses around race cars, boats, RV’s & trucks
• Great protection for painted surfaces
• Used in aviation and aerospace industry
• 36”x 40” Aluminized Mylar Radiant Matting

Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000°F.

• Withstands 500°F of direct heat/2000° radiant
• Edges attach to itself with hook & loop closure design
• Universal-trim length to size
• Can easily be removed for shows
• No need to remove starter for installation in most cases
• Multiple uses to protect master cylinders, cool cans, distributors, fuel pumps & more
• 7” wide x 24” long

Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

• Versatility of fitting diameters 1/2" to 1-1/4"
• Convenient hook & loop designed edges
• Withstands 500°F direct continuous/2000°F radiant heat
• No need to remove wires and hoses
• Easily trimmed to length
• Fireproof
• 1/2” to 1-1/4” diameters x 3 foot length

Protection from hot brake drums and rotors.

• Prevents potential of serious burns or cuts
• Aluminized mylar adhered to fiberglass matting
• Withstand 2000°F radiant/500°F of direct continuous heat
• Protection against dirt, dust & airborne particles around track or shop
• Measures 14" W x 7" D x 13" T

Constructed from the same material as Fire Sleeve but with the convenience of a hook & loop edge closure design. Simply wrap Fire Wrap 3000 around wires, cables or hoses without the need of disconnecting.

• Withstands direct heat up to 500°F
• Protects against oil, dirt, road grime & other contaminates
• Pliable enough to shape & fit tightest bends
• Length: 2 Ft
• Inner Diameters: 5/8", 1" or 1-1/2"

Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

• Double-wall construction for added durability
• Helps prevent burn-through, hardening & cracking of boots
• Installs in seconds
• Universal-fits most straight or angled boots
• Withstands 1200°F direct continuous heat
• Non-flammable & protects against chemicals & resists water

Protect expensive spark plug wire sets from potential burning, cracking, and hardening typically caused by severe under hood heat. Easily installs on wire by removing distributor boot and sliding Protect-A-Wire over spark plug wire.

• Constructed from high temp resistant glass fiber material
• Withstands 500°F continuous 1200°F radiant heat
• Four vivid colors: Silver, Black, Red & Blue
• Available in 2 and 8 cylinder kits
• Protects electrical wiring, speedometer cable, hoses & more up to 10mm diameter
• Includes DEI Hi-Temp Shrink Tubes

Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

• Withstands direct heat up to 400°F & 2000°F radiant heat
• Flexible and easy to apply
• Strong self-adhesive backing
• Use to secure panels, seal air boxes, wrap wiring & more

• Perfect for downpipes or exhaust manifolds
• Black finish
• Comes in the 2" x 25ft sizing
• Reduce under hood temperatures by as much as 50%
• Constructed from pulverized lava rock and woven into a tight weave
• Reduce the chance of heat soak
• Withstands 1800°F direct / 2500°F intermittent heat
• Pre-wetting not necessary for wrapping