Shopping

• Timing Tape comes with 8 tapes to fit common balancers ranging from 5.25” to 8” in diameter
• Tapes are marked off in one degree increments from 14° ATDC to 64° BTDC
• Printed on tough, chemical resistant material
• Help you get an exact timing setting
• Allow you to see exactly where Total timing is set

• 7800 RPM Plug-in Module
• For IMCA Modifieds

• With Soft Touch Rev Control
• Higher output with 530 primary volts and 135mJ of spark energy
• Efficient components use less current to produce more power
• Set an rpm limit on the 6AL with two rotary dials
• Same bolt pattern as the original 6AL with a lower profile housing
• Built-in LED for system checks
• All wires exit the same side through a locked, sealed connector
• Compatible for 4, 6 or 8-cylinder engines

• Higher output with 530 primary volts and 135mJ of spark energy
• Efficient components use less current to produce more power
• Same bolt pattern as the original 6AL with a lower profile housing
• Built-in LED for system checks
• All wires exit the same side through a locked, sealed connector
• Compatible for 4, 6 or 8-cylinder engines
• Secondary Voltage: 45,000 Volts
• Spark Series Duration: 20 degree Crankshaft Rotation
• RPM Range: 15,000 RPM with 14.4 Volts
• Voltage Required: 12-15 Volts, 7 Volt Start
• Current Draw: .7 Amp per 1,000 RPM
• Weight and Size 1.7 lbs., 8"L x 4"W x 1.825"H

The Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources. Each Separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires in place. Each base has a hole for a retaining screw if desired and a tab that will help hold it in position.

• No tools needed to open
• Wires stay in place when cover is removed
• Stand alone or can be bolted down
• Set includes two 4-wire assemblies, two 3-wire assemblies & four 2-wire assemblies

The MSD Digital Soft-Touch HEI Rev Limiter is designed to plug into nearly any HEI distributor and produces an accurate, smooth rev limiting action. The rpm limit is adjustable from 3,000 – 9,900 rpm via two rotary dials with an easy-to-view LED to display the value. Also, if the Limiter loses any connection or is manipulated during a race a fault code will be displayed.

• For use with GM style HEI distributors on V8 engines only
• Limiter is encased in epoxy for protection against the abuse of dirt track racing
• Plugs into nearly any HEI Distributor
• Adjustable Rev Limit from 3000-9900 RPM
• Records highest rpm reached during race

• Zero degree module for use when a module is not used such as MSD 7AL-3
• Retard Module Kit gives you a full selec­tion of retard modules to use with Tim­ing Controls
• Kit #8774 includes 5 modules: 11°, 12°, 13°, 14° & 15°
• Kit #8775 includes 5 modules: 16°, 17°, 18°, 19° & 20°

• Protect ignitions from excessive vibration
• Vibration mounts available for MSD 5 & 6 Ignitions & for the MSD 7, 8 & 10 Series Ignitions

• Rebuild your GM HEI with MSD performance.
• Exceptional high speed coil saturation for full power high rpm operation.
• Matched Coil and Module produce the highest voltage and energy.
• Complete kit with a brass terminal Cap, Rotor, Module, Coil and dust cover.