Shopping

• Heavy-Duty 45 degree double flare tool
• Double flares 3/16", 1/4", 5/16", 3/8" and 1/2" steel or aluminum and .040" copper tubing
• Use for the most common flares in custom length brake and fuel lines
• Includes detailed instructions and a convenient plastic storage case

• High-quality -AN fitting flare tool
• Essential when working with 37 degree flared fittings
• Tool for use with soft copper, aluminum and brass tubing
• Will precisely flare from -03 AN to -10 AN and 3/16" to 5/8"

• Contain the mess of bleeding brakes by capturing fluid in this 16oz. bottle
• 12" long hose which attaches to most bleeder screws
• Removable cap has a built-in fitting to secure the hose during storage to help prevent spills
• Magnet retainer secures the bottle to a steel object such as a brake drum or rotor during bleeding
• Has a one way check valve built-in for one person brake bleeding

• A fast and easy way to remove burrs from the edges of machined or cut metals
• Five piece kit includes handle, telescopic blade holder and three unique blades
• Handle has built-in storage for blades
• Blade holder adjusts from 1" to 5"

• Kit includes an assortment of 60, 80 and 120 grit cartridge rolls
• For cleaning and modifying intake and exhaust ports to match gaskets, remove casting marks and smoothing out runners
• Two 1/4" mandrels are included with each kit

• Add strength and a smooth finish to hole edges
• Unique tools can be used to punch and flare new holes, or to flare existing holes
• Starting with a small center hole, the punch halves bolt together to cut and flare at the same time
• Available in sizes 1-1/2", 1-3/4" or 2"

• Repair or enlarge tapered holes to accept tie rod ends or ball joints
• Reamers may be used in a drill with a 1/2" chuck by removing the T-handle
• Large Diameter is 1" and Small Diameter is 7/16"
• 7.15 Degree
• 1-1/2" taper per foot

• Repair or enlarge tapered holes to accept tie rod ends or ball joints
• Reamers may be used in a drill with a 1/2" chuck by removing the T-handle
• Large Diameter is 1-1/8" and Small Diameter is 3/8"
• 9.56 Degree
• 2" taper per foot

• GM lower spindle checker tool kit, 2" taper
• Assures correct alignment of the upper and lower ball joint when checking for bent spindles
• Insert slugs into spindle and guide rod will fit through slugs if spindle isn't bent
• Kits fit most aftermarket race and GM stock metric spindles